Computer Cleanup
Tips for Cleaning Your Keyboard, Mouse and Monitor
If your computer keyboard no longer offers the same snappy performance it did when it was new... or if your mouse pointer moves sporadically or tends to stick in one position.. or if the mouse itself is a little tacky to the touch, take it as a sign that some cleaning is in order.
Gunk, grime and germs are the natural by-products of computer use. Here are some tips for giving these gremlins a clean sweep. Before you begin, check the owner's manual for any cleaning instructions specific to your keyboard, mouse, or monitor.
No matter what type of equipment you have to clean, the first step is to shut down your computer and unplug the power source.
Cleaning the Keyboard
- With the computer turned off and unplugged, disconnect the keyboard.
- Use compressed gas to clean between the keys. Hold the container so you are spraying at an angle - this will dislodge dust and grime more efficiently.
- Turn the keyboard over and shake it gently to dislodge crumbs and loose dust. It's best to do this over a trash can. Repeat spraying and gently shaking until there's no more particle fallout.
- Spray a small amount of all-purpose cleaner on a soft, clean rag and wipe the keyboard, including the chassis and the keys.
Be sure the keyboard is completely dry before reconnecting it to the computer.
Cleaning the Computer Mouse
Most of use our computers every day, so we're constantly handling that mouse, which means that its surface is a breeding ground for all sorts of germs. A good habit, particularly in cold and flu season, is to give the mouse's surface a daily cleaning. Turn off the computer, then disconnect the mouse and spray a bit of antibacterial cleaner on a soft cloth or use an antibacterial wipe and gently clean the surface of the mouse. If you turn off your home or work computer overnight, make it a habit to clean the mouse before powering up in the morning.
Debris on the underside of the mouse can affect its performance. An optical mouse utilizes a beam of light to track movement and usually requires less maintenance than a former ball mouse. However, it still requires occasional cleaning.
Shut off and unplug the computer, then disconnect the mouse. Then follow the instructions below:
- Dampen a cotton swab with rubbing alcohol, use your fingertips to remove any excess moisture from the bud, and then gently clean the area where the LED and the lens are located. Be very careful not to put any pressure on the LED or lens, and also, ensure that no excess fluid gets squeezed out of the cotton swab into the mouse.
- Using a dry cotton swab, gently wipe over the area to make sure it's dry.
- Turn the mouse right side up and let it continue to dry for a few minutes before plugging it back in.
Cleaning the Mouse Pad
What's the point of cleaning the mouse if it's still picking debris from a dirty mouse pad? Gently clean the pad, using a cloth dampened with an antibacterial spray cleaner. Let it dry thoroughly before setting the mouse back down on the pad.
Cleaning the Monitor
- How you clean your laptop or desktop monitor depends on what type of screen you have.
- Check the manufacturer recommendations. Note that alcohol - or ammonia-based cleaners can damage antiglare coatings.
- For a glass screen, spray glass cleaner onto a soft cloth rather than directly onto the monitor to help prevent fluid leaking into the electrical components inside the monitor. Rub gently.
- For an LCD screen, rub gently, using a dry microfiber cloth or a soft cotton cloth. If the dry cloth doesn't completely clean the screen, dampen the cloth with plain water.
Information supplied by the American Cleaning Institute.